Nbp filesize is 0 bytes sccm

I have tested with a physical machine and also VM on the same subnet. On the VM, 2 '. What am i missing here please? Ok, so realising that the file was missing from my WDS install i did a search and it seems other people have come across this too:. Issue resolved. No idea why that file wasn't populated there to start with when it's required though?

The error that flashes up and disappears in a nano second is: '. If the WDS server and the pxe booting client are on the same subnet then the WDS server can see the pxe booting client and respond accordingly. You can also set up the dhcp options but you need to be careful there.

PXE Boot stops after "succeeded to download nbp file"

Based on the pxe booting arch of the client computer the WDS server should send out the proper boot file name to the target computer. So if you are pxe booting a bios legacy mode computer it will send out the proper boot kernel for bios system, the same holds true for uefi based systems. If you don't have the proper boot kernels on your wds server then your client will not pxe boot. You are the third person in so many days having an issue with WDS. I don't often recommend using wireshark blindly, but in this case you can see exactly what the wds server is telling the client if you install it on the wds server for debugging purposes.

NetBIOS is currently set to default. Please help me understand your logic behind disabling this? I only installed the OS a few days ago, what do i do about this? EFI file.

You should see both. I believe you need to reinstall the WDS role in order to get it.

nbp filesize is 0 bytes sccm

I'd just send it to you, but I'm running R2, and I don't know that they're the same file. I wasn't aware you could just copy it, and I've surprised this works, since UEFI booting requires a valid cert.

As for why it happens, nobody knows for sure, but it is a known issue. To continue this discussion, please ask a new question. Get answers from your peers along with millions of IT pros who visit Spiceworks.

FOG Project

All other settings default. Best Answer. We found 5 helpful replies in similar discussions:. Fast Answers! DarkSync Dec 23, Was this helpful?

Thai Pepper. Mercutio Dec 23, Have you repointed your DHCP options to the new server and the new file? See all 5 answers. Popular Topics in Windows Which of the following retains the information it's storing when the system power is turned off? Big Green Man This person is a verified professional. Verify your account to enable IT peers to see that you are a professional.Thanks for the information!

We are going to get PXE going tomorrow and this is something good to note. Wow really Awesome blog its so informative for us,Click on this link. Very Educational Henk, It is close to a problem I am having. How would I make that work, currently it gives me the 0xc error. Thanks for comment. I had the same error before.

nbp filesize is 0 bytes sccm

Have you tried that already? Configuration shown in blogpost. Good info but a bit confusing, why even use options 66 and 67 when MS advises not to do this. You either have a flat network where these options are not required or use IP helpers. Most issues occur when people are told to use these options!

Besides of Microsoft telling not to do this, this is not always applicable for specific subnets. Therefore a blogpost to help you with the config. Backup wdsmgfw. Make a copy of bootmgfw. Boot via PXE. Try installing via USB and you get the same results - full resolution on the laptop screen This also avoids having to alter DHCP settings -- although I couldn't work out how to keep wdsmgfw.

Yes, renaming the file will do indeed. Did that before on n12 file also. Unfortenately when WDS is restarted the file will be in the original state again as you mention! I wonder if you set the file to read-only if it will be preserved past a WDS restart.

That's what I used to do with the n12 files. With option 60 set to PXEClient, clients are not even able to load wdsmgr. Am I getting something wrong?

Thanks for this most, it really helped me out! What are your suggestions for a mixed scenario in the same DHCP scope? Thanks in advance! When having a mixed scenario, the only solution possible is using IP-helpers which is the preferred method anyway. Otherwise you can setup multiple DHCP scopes with different boot files it works, but is a bad solution. Hope it helps! This is not true. You can do it via DHCP using policies.Server did not respond.

Turn on suggestions. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for. Search instead for. Did you mean:. Contact Email us Tell us what you think. Log In. New Discussion. PXE-E Timeout.

Super Advisor. Hi, I have problems with one restore of one ignite. The cable its connected but the Server doesn't respond. Could anyone help me? Thanks a lot of! All forum topics Previous Topic Next Topic. Acclaimed Contributor. Hope this helps! Regards Torsten.

Please ask the forum! Yes, The nbp. Do you need by chance a gateway? Gateway IP address -gip in dbprofile Hope this helps! Sure you can contact the server via this NIC? Honored Contributor.

FOG Project

On the You can also use '-d 9' on bootp to turn on debugging and watch the syslog when attempting boot. Exalted Contributor. Shalom, Based on what I see, I would check the inetd. This would be on the Ignite server as well. Hi, I have all ok configured on the server, I have reset de inetd but it doesn't works ok. The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise.

By using this site, you accept the Terms of Use and Rules of Participation. Hewlett Packard Enterprise International.Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you may not be able to execute some actions.

Please download a browser that supports JavaScript, or enable it if it's disabled i. Great forum and awesome community. Next step was to relocate the server back to the VLAN it belongs and everything stopped working. Actually it was in a different VLAN than the clients all the time, but it was the wrong one. I know… Stupid mistake…. My configuration: FOG Server - 1. But I tried the undionly.

Now everything is going great.

Part 1 - SCCM Fundamentals

Thanks a lot for your help! So you will need your infrastructure team to look at it. The server has also access to the internet. Thanks a lot for the help and I will come back with the solution as soon as I got it. Maybe someone else experiences the problems. Do you have any thoughts on that? I implemented a rule that allows all traffic through all ports between the two networks. Well since they are on different subnets, can the workstations on the remote subnet ping the FOG server or connect to the web ui?

If yes then network routing is setup correctly. Is a default route defined? If your test computer was on a different subnet then do you have another computer on the same subnet as the FOG server? If the above test fails then you should install the tftp client on your FOG server understand we keep moving towards the source with these tests. Then issue the following command from your fog server tftp -4 Edit: BTW the output from the netstat commands means that the tftp service is listening on the proper port and its up.

That worked earlier. I one more time turned off the windows firewall and tried to get the ipxe. There was a request timeout. Do have anything else I could check? But what I can see from it is the FOG server and pxe booting client computer are on different subnets. This will mask the dhcp part of the pcap. So on the fog server key in the following command to see if the tftp server is listening. The next check you should be able to do with a windows computer, you will need to add the tftp client feature into windows We are only interested in seeing if the download works.

Should be public now. This will capture what the target computer is being told to do. Its a little complicated but the quickest way to give us a direction. Upload the pcap to a file share site i.Jump to content. You currently have javascript disabled.

Several functions may not work. Please re-enable javascript to access full functionality.

KACE Product Support Question

I wasn't actually loading a PXE file. I should read more carefully next time. Posted 28 April - PM. I've gotten my DHCP Options to work and the TFTP Server also seems to work fine as far as I can tell from the logs - file transfer passes trough without any errors but for whatever reason while PXE booting the machine downloads the file and then just stops.

nbp filesize is 0 bytes sccm

Nothing else happens. I thought that it may have to do with the IP I've written in conf. I have no clue where this character comes from. Community Forum Software by IP. Forum Downloads Tutorials More. Javascript Disabled Detected You currently have javascript disabled. Go to the full post. Please log in to reply. My bootfile is called "ipxe. Any help is greatly appreciated! When the client tries to download the ipxe. Station IP address is: We are exclusively deploying to UEFI machines.

When I go to network boot, it sees the server with the correct address but references a different file than the one that I told it to in option 67 it looks for wdsmgfw. For instance, I am seeing a lot of posts talking about wdsmgfw. First let me say I don't know wds, but I do know pxe booting process.

It sounds like wds is not configured for pxe booting for uefi. The OP of that thread found the missing files and placed them in to proper location. Windows 10 when adding the boot image, does not add the wdsmgfw. Adding the boot. If you want to still install systems using the Legacy BIOS, you will have to configure the vendor class options as well.

Thanks for the help! Left alone, it will provide the correct boot file to the client based on that architecture information. DHCP options get in the way nowadays.

Also, when you go to the boot images node of WDS, what do you see? Did you import an appropriate boot image from your install disc? I removed both of the options. It is still trying to pull the file from the IP?

It's like there is some residual setting that the PCs keep trying to reference. I generate the boot images from MDT and replace them every time we make changes. Thank you for referencing that post. It makes sense that it cannot find the file because everything that I am reading says "wdsmgfw. I have NO explanation for this.

I did a search for "wdsmgfw. Thanks for the help everyone and thank you for referencing that post George. Very strange issue, I don't know why I did not have the wdsmgfw. I never deleted it. I'm glad you got it worked out, I know how to test out the pxe booting process. I guess I need to play with WDS to see if there is an initial setup that asked about uefi or not. Its a bit strange that two people had different fixes for the same exact issue. To continue this discussion, please ask a new question.So I installed the role and got the boot.

So the WDS is setup as stand alone though it is a server on the domain. Which is also working. I have set the correct ports in DHCP settings as well. I swear I could do this before with the WDS being on one subnet and the DHCP running a completely different subnet out of one nic not to interfere with the existing network. I've also tried changing the server to a static I think your option 67 is wrong.

I don't have one to look at right now, but you only need the file name, not the directory. I've never used the same server for both before, just throwing out ideas. It is wrong, but OP isn't at the point that this matters yet, since the laptop isn't even getting an IP. This is far preferred over DHCP options.

Ok so I setup a whole WDS again from scratch just to make sure I was missing nothing. Just did a fresh W10 iso with the boot. Tried booting the Dell machine again and it flashed an error that I had to record in slo-mo on my phone to catch what it was:. Then I thought hmmmmm, does this file even exist? When to the boot folder and guess what, it didn't exist. So I think my problem is something else. I tried an older machine with built in LAN and it works. The machines I'm trying to get working are laptops with usb-c to ethernet.

So the server does work before I lost my mind on it. I think I have all the correct settings on the Dell Client.

I think it may be something to do with WDS. Not all of them are. The OP has the wrong option for dhcp option 67 for a uefi system. I might even propose that you remove dhcp option 67 all together. Let WDS tell the target computer what it needs. You can use wireshark to capture the dhcp process if things are still going sideways to understand what isn't working.

For these clients with the usb-c docks, for uefi based hardware you need to enable the uefi network stack in the firmware to allow them to pxe boot and to have the network booting options in the F12 boot menu you should use this to confirm. When you use the F12 boot menu To continue this discussion, please ask a new question.

thoughts on “Nbp filesize is 0 bytes sccm

Leave a Reply

Your email address will not be published. Required fields are marked *